0800 999 0123 Mon-Sat: 9am-5pm. Sun: 10.30am-4.30pm
Open 7 days a week
35 stores nationwide
Save an EXTRA 10% on already discounted packages!
Offer ends 31st August 2019
Spar aggregate finish concrete panels
Lidgetcompton's reinforced thicker concrete panels are finished with an attractive spar aggregate finish
Steel roof sheets with anti-condensation treatment - Pent roof
These sturdy roof sheets come with an anti-condensation lining to prevent dampness
Fibre cement roof sheets - Apex roof
These solid grey roof sheets, blend in with most homes and also come with eaves fillers to stop any draughts.
Treated timber fascias and vergeboards
All Essentials range buildings are have treated timber fascias and vergeboards for a smart finish.
Treated 4ft fixed timber window
A 4ft wide timber window lets in plenty of natural daylight
3ft wide Deluxe timber personnel door
A solid 3ft wide timber door provides secure access to your shed
A nice neat internal sand/cement fillet provides an additional internal sealent against moisture.
Delivery and Installation
An expert team of fitters will deliver and install your garage onto a suitably prepared base.
With LidgetCompton's 10-year structural guarantee, you can be rest assured you're investing in a quality product.
These are ideal if you want to line your garage with boarding and insulation or simpley mount a board for your electrical fittings if you want to install electricity.
These sturdy shelves are attached to the panel bolts and offer valuable storage space. Available in 2ft, 4ft and 6ft lengths.
uPVC guttering and downpipes
Add guttering to your buildings to collect valuable rainwater, or simply divert into your water drainage.
Personnel door upgrade
Upgrade your door from a deluxe timber personnel door to a galvanised steel personnel door.
Allow more light into your shed by adding additional windows
The LidgetCompton Essentials shed features a spar finish as standard.
Available in either apex or pent roof, the essentials range has treated timber facias and vergeboards, a treated 3ft deluxe timber personnel door and a 4ft treated fixed timber window.
*Please note that buildings narrower than 8ft wide will have a 2ft window (as seen here) not a 4ft window.
Making your garage weather-tight is very important and two of the key elements of this are shown in this picture. When installed, your garage fitters will seal between the panels with a water resistant mastic sealant which prevents draughts and damp. The fitters will then fill and smooth around the bottom edge as shown in the picture with a sand/cement fillet.
A 4ft, 2 pane fixed window is supplied as standard with every LidgetCompton Essentials shed, shown here on a Pent roof garage. You can specify an opening window at a slightly increased cost or a double glazed PVCu window if you prefer.
*Sheds are supplied with a 2ft wide window on buildings narrower than 8ft wide.
An interior shot of the deluxe wooden door shown here on a Pent roof garage. Even in this application there's room to fit the door under the up and over lifting gear. Normally you would expect to position this door further down one side or at the rear. Note that the door is strongly framed and includes a secure lock.
GBC have branches all over the country displaying our buildings and offering help and advice to our customers.
Established in 1986, we are real people with our feet on the ground and with a real investment in and commitment to our buildings.
We are not an anonymous internet site.
Please give us the opportunity to assist you in buying the building of your choice ... contact us by freephone, email, our live website chat or call our branches direct. You will find all of these contact opportunities in this website. We look forward to speaking to you
All concrete sheds include installation by an expert team of builders. A concrete base needs to be prepared by you prior to delivery. Base plans for each building and base-building information is available, to ensure that there are no issues when we deliver and install.
As all of our concrete sheds are very heavy, they are normally delivered using large lorries. So that we can be sure that buildings are safe and undamaged when unloaded, we also use lorry-mounted fork-lifts to manoeuvre the concrete panels.
To be able to do this, we will need to ask you questions relating to access and the size of lorry that will be able to reach your property. Once you have placed your order, you will be asked to fill out a 'help-the-driver' form that will give you the opportunity to give as much detail as possible - allowing us to deliver and install your new concrete shed.
As there are so many variations in our range of concrete sheds and each one is made to order, you should expect to receive delivery of your new building around 4-6 weeks from when your “help the driver” form has been sent back to us.