DOUBLE DISCOUNT OFFER
10 % 20% off all new Malvern Collection Buildings
Ends 15th March!
The Malvern Bewdley Corner shed is constructed from high quality materials, but with your budget in mind.
The Bewdley Corner shed has been designed to allow you to make the most efficient use of space within your garden. Available in two sizes, this attractive shed is available in a choice of either 12mm Deal shiplap that has been pre-treated with high quality wood preserver, inside and out or 12mm pressure treated deal as a maintenance free alternative.
The floor and roof are made from 12mm tongue and groove deal timber - we do not use chipboard or pressed fibre board - meaning that your shed really is designed to last. Your roof will be finished with a high grade mineral felt that is available in either red or green to suit your garden.
The Bewdley Corner sheds also have a low roof line, meaning it will be less visible to neighbouring properties.
Each Bewdley Corner shed comes with two fixed windows either side of a single door. For added safety you can also add optional toughened safety glass.
Rear height: 1.86m
Front height: 2.23m
Door width: 0.89m wide
This Corner Shed is ideally suited to small gardens where space is at a premium.
Try to site it around 18inches from the fence if possible in order to get around it to maintain the timber ( and the fence or hedge ) periodically.
There's a bigger, 8ft x 8ft, version too.
The Bewdley Corner Shed pictured here is sturdily constructed as standard in preservative treated deal ( pine ) . Three hinges and a fold over hasp are fitted to the door. The door can be hinged on either side ( shown here LH hinged ).
The floor and roof are constructed with real timber too... not chipboard or compressed fibre board . This is important as it is stronger and resistant to damp conditions. Externally the roof is felted with a good quality mineralised roof felt.
Bewdley sheds are constructed with quality, planed deal ( pine ). This is treated with a wash of quality wood preserver both inside and out before it leaves the factory. This ensures that the treatment reaches into the end grain and between the tongued and grooved cladding.
You can see from the picture the quality of the external cladding.
We also supply the Bewdley in pressure treated pine.
Each Bewdley shed is fitted with a fold over hasp and staple as illustrated so that you can fit a padlock of your choice.
Turn pegs as photographed are fitted at the top and bottom of the door on each Bewdley shed.
These are handy for keeping the door shut briefly when you are going in and out but also help prevent the door from twisting if it is left shut for long periods of time without use.
If you are a novice when it comes to sheds then this picture is for you !
Most shed floors are constructed with floor joists which are deal (pine). These can be seen under the floor running down the length of this shed. If they are set directly onto your base they will deteriorate after a few years as water penetrates into the timber. By choosing a set of pressure treated floor bearers ( the timber running side to side in this picture ) you will extend the life of your shed significantly as these bearers will last a lifetime as the preservative is forced into the timber under pressure. This is the same process used for fenceposts and suchlike. Beneath the bearers you will see pressed grey slabs ... probably the best way of constructing a base for your building.
Bewdley sheds are constructed with quality, planed deal ( pine ). The framework has rounded edges to prevent splinters. The whole building is treated with a wash of quality wood preserver both inside and out before it leaves the factory. This ensures that the treatment reaches into the end grain and between the tongued and grooved cladding. You can see from the picture the quality of the internal framing, this is at the point where it meets the roof which you can see is also constructed from tongued and grooved timber.
The Bewdley is also available in pressure treated pine ( pressure treatment is where all of the components are put in a pressurised cylinder with the preservative to force it further into the timber ). The pressure treated version has that green/yellow hue that is preferred by many householders.
Shown here on the 6ft x 4ft Apex version but also available on the Pent or Corner versions of the Bewdley.
We take pride in making sure that your building will arrive in perfect condition - that is why we use our own team of drivers and fitters. As with all of our garden buildings, we like to provide our customers with a suitable delivery time. We always give good notice of our arrival date allowing you to be sure it is the right time for you. We always appreciate any helpful information regarding access to your pre-prepared base area, plus any details you may need to share with us about reaching you - so that the delivery process can run as smoothly as possible.
Our Malvern Traditional Sheds all come with optional installation. If you are thinking about having your garden shed installed by our skilled team of fitters, please be aware that you will need to have a good, strong, level base, pre-prepared prior to your delivery date. We would normally recommend a base constructed from either slabs, concrete or heavy duty decking. We will always confirm these details with you at point of order and we will provide you with base plans if needed. These measures ensure that no detail is left out - ensuring that your garden shed will be both delivered and installed without any inconvenience. Alternatively, if you choose to install the building yourself, we will provide a complete set of easy-to-follow instructions and fittings.
Our delivery times can vary from season to season, but typically, you should expect to receive your building around 3-4 weeks from when you order. All of our buildings are made to order, so during the busy spring to summer seasons, this may increase to 6-10 weeks dependant on the building that you have purchased. Please feel free to contact us on 0800 999 0123 to check our current delivery times.