Malvern Bewdley Apex Shed

4ft x 4ft Bewdley Apex shed

This is a very popular size of shed which fits easily into gardens where space is at a premium.
Bewdley sheds are constructed using only real timber ( in other words you won't find chipboard or pressed fibre board in the floors and roofs ) . This means they will last longer particularly as they are put through a wash of a good quality preservative before they leave the factory ensuring that the treatment reaches into the end grain and between the tongued and grooved cladding.

8ft x 6ft Bewdley Apex shed

The Bewdley 8ft x 6ft shed has been in continuous production for over 20 years which is a good indication of its popularity. Sturdily constructed, it is weatherproof and well finished.

At GBC we display Bewdley sheds at all of our branches as we know they are a reliable and trouble free choice for our customers. Although we occasionally sell these for DIY assembly, in general the manufacturer's own teams of trained fitters install these for us making life much easier for our customers !

8ft x 8ft Bewdley Apex shed

This picture illustrates the double doors available with 8ft width Bewdley Apex sheds. Bewdley Apex sheds are available 4ft, 5ft, 6ft or 8ft wide and in a choice of lengths too so we're sure to have a size that's appropriate for your garden.

Bewdley Apex shed detail

This picture shows some of the detail you can expect with your Bewdley Apex shed. The door is ledged and braced for strength and is fitted with a fold-over hasp and staple.

There is one fixed window which can be fitted on either side. The floor and roof construction uses tongued and grooved, treated deal(pine)timber rather than inferior chipboard or pressed fibre board products.

Deal ( Pine ) cladding for Bewdley sheds

Bewdley sheds are constructed with quality, planed deal ( pine ). This is treated with a wash of quality wood preserver both inside and out before it leaves the factory. This ensures that the treatment reaches into the end grain and between the tongued and grooved cladding.

You can see from the picture the quality of the external cladding. There's another picture here of the inside of the building which illustrates the framework detail.

Deal ( Pine ) framing for Bewdley sheds

Bewdley sheds are constructed with quality, planed deal ( pine ). The framework has rounded edges to prevent splinters. The whole building is treated with a wash of quality wood preserver both inside and out before it leaves the factory. This ensures that the treatment reaches into the end grain and between the tongued and grooved cladding. You can see from the picture the quality of the internal framing, this is at the point where it meets the roof which you can see is also constructed from tongued and grooved timber.

There's another picture here of the outside of the building which illustrates the cladding detail.

Hasp and staple for Bewdley sheds

Each Bewdley shed is fitted with a fold over hasp and staple as illustrated so that you can fit a padlock of your choice.

Turn pegs for Bewdley sheds

Turn pegs as photographed are fitted at the top and bottom of the door on each Bewdley shed.

These are handy for keeping the door shut briefly when you are going in and out but also help prevent the door from twisting if it is left shut for long periods of time without use.

Apex of Bewdley Apex Sheds !

This picture illustrates the attention to detail that goes into your Bewdley shed. The bargeboards aren't just plain planks of wood... they are neatly moulded and the joint at the top is covered with a diamond shaped capping.

Bewdley sheds are manufactured to give many years of trouble free use ... but they are also made to look good too !

Pressure treated floor bearers

If you are a novice when it comes to sheds then this picture is for you !

Most shed floors are constructed with floor joists which are deal (pine). These can be seen under the floor running down the length of this shed. If they are set directly onto your base they will deteriorate after a few years as water penetrates into the timber. By choosing a set of pressure treated floor bearers ( the timber running side to side in this picture ) you will extend the life of your shed significantly as these bearers will last a lifetime as the preservative is forced into the timber under pressure. This is the same process used for fenceposts and suchlike. Beneath the bearers you will see pressed grey slabs ... probably the best way of constructing a base for your building.

Deal ( Pine ) framing for Bewdley sheds

Bewdley sheds are constructed with quality, planed deal ( pine ). The framework has rounded edges to prevent splinters. The whole building is treated with a wash of quality wood preserver both inside and out before it leaves the factory. This ensures that the treatment reaches into the end grain and between the tongued and grooved cladding. You can see from the picture the quality of the internal framing, this is at the point where it meets the roof which you can see is also constructed from tongued and grooved timber.

There's another picture here of the outside of the building which illustrates the cladding detail

GBC...here to help you

GBC have branches all over the country displaying our buildings and offering help and advice to our customers.
Established in 1986, we are real people with our feet on the ground and with a real investment in and commitment to our buildings.
We are not an anonymous internet site.
Please give us the opportunity to assist you in buying the building of your choice ... contact us by freephone, email or call our branches direct. You will find all of these contact opportunities in this website. We look forward to speaking to you