0800 999 0123 Mon-Sat: 9am-6pm. Sun: 10.30am-4.30pm
Open 7 days a week
35 stores nationwide
UP TO 25% OFF LIDGETCOMPTON BUILDINGS
Offer ends 31st October 2017!
*Excludes Deluxe Packages
Based on the four basic building shapes (Pent, Apex, Apex 15 and Apex 20), the LidgetCompton Sheds and Workshops range can be supplied from 4ft (1.22m) to 26ft 6in (8.08m) wide, or from 4ft (1.22m) to 28ft 3in (8.61m) long (Pent) or as long as you want as any of the Apex range.
With the full range of options, your shed or workshop can be specified exactly as you want it. Three standard heights complete the choice. The LidgetCompton Design & Build service offers the ultimate flexibility. The LidgetCompton sheds and workshops can be lined and insulated to provide exactly the right environment for you. Whether your building is for storage, workshop, hobby room, kiddies play room and toy store, utility room, motorbike store or somewhere to put the garden furniture - we can help. You can combine your building with a garden room specification – a partition wall gives you the best of both worlds.
With the new Stone and Brick effect and Textured finishes, your Shed or Workshop will blend in to your property and as they are made out of concrete panels, they will not catch fire, rot or need treating.
Most of our garage types can be specified as sheds too : here the Pent Mansard shape is utilized in this high spec concrete shed.
Metrotile roof and PVCu windows and facias are standard ( there's one extra window fitted ).
The vertically ribbed galvanised steel door has been specified to open inwards.
Installation on our customers' suitably prepared bases is included for all of our LidgetCompton garages.
This image shows a LidgetCompton Pent Shed in red brick effect finish. This model is 8ft wide x 6ft deep with white PVCu fascia and vergeboard, a vertically ribbed galvanised steel door and a PVCu fixed window. This building also benefits from guttering and downpipe to the rear.
The door on this building has been specified to open inwards.
There are four choices for the exterior walls of your Compton Lidget Shed. The most popular is the spar aggregate finish pictured here.
It's an attractive, inexpensive and maintenance free finish which is applied at the factory during manufacturing.
Alternatively you can choose a brick finish, stone finish, or a textured finish.
There's a choice of four wall finishes for your Lidget Compton shed or workshop. Illustrated here is the Sectional Brick finish. Other choices are the Spar aggregate, Stone or Textured finishes.
There are 4 different sectional brick colours to choose from .. this one is 'Deep Red' but we also have a buff brick, brown brick and a different shade of red available.
Our display centre staff can help you decide which one is most appropriate for your location !
Making your garage weathertight is very important and two of the key elements of this are shown in this picture. When installed, your garage fitters will seal between the panels with a water resistant mastic sealant which prevents draughts and damp. If you choose the option of a sand/cement fillet the fitters will fill and smooth around the bottom edge as shown in the picture with a cement fillet.
This is the optional 3ft personnel door, available as an upgrade on the Lidget Compton shed. This one is in vertically ribbed steel and is finished with a white powder coated paint finish. There's a choice of different styles too so please be sure to ask about other options.
GBC have branches all over the country displaying our buildings and offering help and advice to our customers.
Established in 1986, we are real people with our feet on the ground and with a real investment in and commitment to our buildings.
We are not an anonymous internet site.
Please give us the opportunity to assist you in buying the building of your choice ... contact us by freephone, email or call our branches direct. You will find all of these contact opportunities in this website. We look forward to speaking to you
All concrete sheds include installation by an expert team of builders. A concrete base needs to be prepared by you prior to delivery. Base plans for each building and base-building information is available, to ensure that there are no issues when we deliver and install.
As all of our concrete sheds are very heavy, they are normally delivered using large lorries. So that we can be sure that buildings are safe and undamaged when unloaded, we also use lorry-mounted fork-lifts to manoeuvre the concrete panels.
To be able to do this, we will need to ask you questions relating to access and the size of lorry that will be able to reach your property. Once you have placed your order, you will be asked to fill out a 'help-the-driver' form that will give you the opportunity to give as much detail as possible - allowing us to deliver and install your new concrete shed.
As there are so many variations in our range of concrete sheds and each one is made to order, you should expect to receive delivery of your new building around 4-6 weeks from when your “help the driver” form has been sent back to us.